An important part of custom embroidery is digitization. Keep reading to know that what are the steps leading to a perfect and the best embroidery digitizing designs? The digitizer must analyze the design to determine if embroidery needs to be edited. Other changes you might need to make are resizing the image, eliminating the outline, and zooming in on the small text.
Once the design has been modified using graphics software, the file will be used as a template for the best embroidery digitizing program to create a stitch file. The digitizer must then decide how to run the path in the logo. The sequence of stitches in the design is called the path. The execution of the design is largely dependent on the path. If the order in the embroidery is not correct, the design may have a gap and become uneven. While this may not seem important, the design time with shorter runtimes is lower.
Next, specify the stitch type for each part of the design based on the stitch that best represents the artwork. First, the digitizer adds a backing stitch. Despite the fact that the stitches are not visible in the finished logo, the correct underlay stitches are required to create a beautifully looking logo. The liner helps stabilize the fabric onto the backing, lowers the fluff of the fabric, leaves the remaining stitches with a smooth surface for embroidery, and also increases the density of the design. If the underlay is not suitable, the stitches tend to sink into the fabric or the fabric is shown through the design.
Although there are only three basic types of stitching: running, satin and filling stitches, these stitch types vary. The fabric type of the embroidered logo should be considered and adjusted as appropriate when determining the stitching. The suture will sink into a fabric such as a fleece and be laid on the surface of a dense fabric such as nylon. The logo, which was originally digitized by denim, did not look very good when the embroidery knits were embroidered onto the fabric.
Push and pull is another important aspect of embroidery. The design may move while embroidering. This will cause some stitching to shift.
Even though it seems that the left chest business logo is easy to digitize, designs with details, small text and color changes require more time to set up. It takes a lot of time and experience to digitize the design correctly, because it is a very rigorous process. The digitizer must know the difference between seeing different stitches on the fabric and seeing them on the software. The best embroidery digitizing design will make your logo look better, so it is important to hire a high quality digital person.